A New Pathway to Synthesize Cyclomercurated Ferrocenylimines Containing Heterocyclic Ring

The cyclomercurated ferrocenylimines containing heterocyclic ring were prepared by the condensation of cyclomercuration of acylferrocene with the appropriate heterocyclic amine.This procedure provides an efficient method for the synthesis of cyclomerucurated ferrocenylimines containing heterocyclic ring which are difficultly synthesized by the conventional method.The reaction mechanism is proposed.     

光纤陀螺随机误差的滤波方案的探讨

范跃祖，宁文如，刘剑．光纤陀螺随机误差的滤波方案的探讨．数理统计与管理，１９９７，１６（４），２９～３２．光纤陀螺是新一代的光学陀螺仪，它的性能决定着惯性参照系统的精度。光纤陀螺的误差分为两大类。一类是有规律的，另一类是随机的。本文提出了两种新的用于光纤陀螺随机误差补偿的Ｋａｌｍａｎ滤波方案，考虑了两种随机模型：（Ⅰ）角速度变化为等随机的；（Ⅱ）角速度变化为等随机加速的。仿真结果表明，第二种方案对噪声起到了很好的抑制作用和滤波效果     

Crystallization process of Bi(Pb)-Sr-Ca-Cu-O glass

A crystallization study has been carried out for rapidly solidified Bi₂Pb_0.5Sr₂Ca₄Cu₅O_x glass. Glass transition temperature T _g, crystallized superconducting phases and microstructural changes were measured and analysed by differential thermal analysis (DTA), X-ray diffraction (XRD), and scanning electron microscopy (SEM). The crystallization mechanism of the three superconducting phases — (2201) 20 K phase, (2212) 80 K phase, and (2223) 110 K phase — has been discussed, and a time-temperature-transformation diagram for the glass has been constructed.     

BAHADUR ASYMPTOTIC EFFICIENCY IN A SEMIPARAMETRIC REGRESSION MODEL

ＢＡＨＡＤＵＲＡＳＹＭＰＴＯＴＩＣＥＦＦＩＣＩＥＮＣＹＩＮＡＳＥＭＩＰＡＲＡＭＥＴＲＩＣＲＥＧＲＥＳＳＩＯＮＭＯＤＥＬ￥ＬＩＡＮＧＨＵＡ；ＣＨＥＮＧＰＩＮＧＡｂｓｔｒａｃｔ：ＴｈｅａｕｔｈｏｒＳｇｉｖｅＭＬＥθ１ＭＬｏｆθ１ｉｎｔｈｅｍｏｄｅｌＹ＝θ...     

类锂硅离子软X射线激光研究

在激光等离子体典型参数条件下，利用碰撞－辐模型计算了类锂硅离子５ｆ－３ｄ和４ｆ－３ｄ跃的粒子数反转比率和激光增益系数。讨论了不同热带条件和不同冷却速度下，激光增益系统数的变化。计算结果表明，高功率，短脉冲激光生产的高温等离子体在快速冷却条件下能产生软Ｘ射的线激光增益。     

The Existence of Periodic Orbits for Higher Dimensional Autonomous Systemswith Small Perturbations

ＴｈｅＥｘｉｓｔｅｎｃｅｏｆＰｅｒｉｏｄｉｃＯｒｂｉｔｓｆｏｒＨｉｇｈｅｒＤｉｍｅｎｓｉｏｎａｌＡｕｔｏｎｏｍｏｕｓＳｙｓｔｅｍｓｗｉｔｈＳｍａｌｌＰｅｒｔｕｒｂａｔｉｏｎｓＪｉａｎｇＬｉｑｉｎｇ（蒋里强）；ＺｈｏｕＹｉ（周毅）；ＦａｎＹｅ（范晔）（...     

Interfacial effects on stress distribution in model composites

Raman mechanical spectroscopy was used to examine interfacial effects on the stress distribution in model polydiacetylene fiber/epoxy composites. Epoxy release agents were coated on fiber surfaces to modify the interfacial adhesion properties. The modified fiber surfaces were then characterized by scanning electron microscopy and x-ray photoelectron spectroscopy as well as optical microscopy. No difference in the maximum stress value or stress distribution was observed for the two types of fibers, coated or uncoated, used in composites. This suggests that adhesion properties at the composite interface do not affect tensile stress transfer efficiency nor, therefore, the composite tensile modulus along the fiber axis direction in uniaxial composites. Experimental data were also compared with theoretical calculations assuming perfect bonding between fiber and matrix, and idealized frictional force transfer mechanism at the fiber–matrix interface.     

类金钢石非晶碳薄膜的光吸收和光致发光研究

我们用激光轰击石墨靶成功地制备出类金刚石无氢非晶碳薄膜.测量了光学吸收、光致发光及其随入射光强度的变化关系.结果表明,这种薄膜具有类金刚石的性质,光学带隙在1.67-2.25eV,发光在可见光区呈宽带结构.低激发强度下发光强度超线性变化,而在高激发强度下则为线性发光.我们用非成对载流子复合的模型对结果给出了合理的解释.用带尾态饱和的模型解释了发光峰值随激发光强增加而蓝移的现象.     

“J—646”新型光学光敏胶胶合工艺简介

“J—646”光敏胶具有透光率好,收缩率小,粘接强度适中,耐老化,毒性小和成本低廉等特点。本文简要介绍了该胶的胶合工艺。     

不同激发密度下CdS晶体的光致发光和受激发射

本文主要研究在77-111K温度范围内、不同激发密度的N2激光器的337.1nm谱线激发下,激子-激子(Ex-Ex)、激子-载流子(Ex-e)的相互作用和发射一个LO声子(Ex-1LO)、两个LO声子(Ex-2LO)的自由激子的辐射复合行为.并在77K温度下观测到由Ex-Ex发射产生的受激发射.